ABSTRACT
A molecular imprinting polymer technique was successfully applied to precipitation polymerization by using styrene as a functional monomer, curcuminoids as templates, acetonitrile as a porogenic solvent, benzoyl peroxide as the initiator, and ethylene glycol dimethacrylate as the crosslinker. The effects of interaction on the adsorption capacity of the molecularly imprinted polymer (MIP) and non-imprinted polymer (NIP) were investigated. A comparison of the adsorption capacity for MIP and NIP indicated that the NIP had the lowest adsorption capacity. The curcuminoid-imprinted polymer (Cur-MIP) was syn-thesized from 0.0237 mmol of styrene, 47.0 g of acetonitrile, 1.0238 mmol of ethylene glycol dimetha-crylate, 0.0325 mmol of curcuminoids, and 0.2480 mmol of benzoyl peroxide. A high-performance liquid chromatography method with fluorescence detection was developed and validated for various chro-matographic conditions for the determination of the curcuminoids in turmeric samples. The sample solution was separated using the Cur-MIP via solid-phase extraction and analyzed on a Brownlee ana-lytical C18 column (150 mm × 6 mm, 5μm) using an isocratic elution consisting of acetonitrile and 0.1%trichloroacetic acid (40:60, v/v). The flow rate was maintained at 1.5 mL/min. The fluorescence detector was set to monitor atλex = 426 nm andλem = 539 nm. The quantification limit values were found to be 16.66, 66.66, and 33.33μg/L for curcumin, demethoxycurcumin, and bisdemethoxycurcumin, respec-tively. Thus, we concluded that the Cur-MIP and high-performance liquid chromatographic-fluorescence method could be applied to selective extraction and could be used as a rapid tool for the determination of curcuminoids in medicinal herbal extracts.